vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Fuel Pump > < TABLE 2, TROUBLE CODES - Trouble Code 16 KNOCK SIGNAL CIRCUIT

Table 2, Trouble Code Table

 

 

Trouble Code

Information Sensor

Cause of Fault

Remedy in

F0: DATA LIST

No.

Trouble Code Storage when

23

KNOCK SIGNAL OUT OF RANGE

10

·     Coolant temperature higher than 35 °C / 95 °F (C 18 XE) or higher than 30 °C / 86 °F (X 20 XEV)

·     Engine speed higher than 1984 rpm

·     Knock sensor signal (noise value) greater than 4.5 V (C 18 XE) or greater than 4.6 V (X 20 XEV)

·     Air mass greater than 0.1 9 g / stroke

·     Above conditions must be fulfilled for at least 2.0 s

 

Replacement values:

·     The control unit retards the firing angle by 12 °CA for reasons of safety

 

Effects:

·     The knock control is switched off

 

 

 


Related Literature Units
-F0: DATA LIST - Test Step 10 KNOCK CONTROL

Fuel Pump > < TABLE 2, TROUBLE CODES - Trouble Code 16 KNOCK SIGNAL CIRCUIT