Fuel escapes. Observe safety rules and national regulations.
Install, Connect Connect Fuel Pressure Gauge KM-J-34730-91 (2) to checking connection (1). Start engine and bleed fuel pressure gauge - idle speed. Collect emerging fuel in suitable container.
Inspect Check fuel pressure. Start engine and run in neutral. Reference value: 2.2 to 2.5 bar. Use vacuum pump MKM-667 to admit fuel pressure regulator at 0.5 bar. Reference value: see relevant testing instructions.
Remove, Disconnect Remove Fuel Pressure Gauge KM-J-34730-91 from checking connection. |