Disconnect wiring harness plug (1) from oil pressure switch, remove oil pressure switch (2) - place collecting basin underneath.
Inspect Check oil pressure with KM-498-B (3) and KM-135 (4). The oil pressure should be approx. 150 kPa (1.5 bar) at idling speed and oil temperature ≥ 80 ° C.
Install, Connect
Install oil pressure switch at oil pump. |
1.4 / 1.6 Ltr. Engine Except 16 LZ2: |
Tightening torque 30 Nm/22 lbf. ft. |
1.8 / 2.0 Ltr. Engine and 16 LZ2: |
Tightening torque 40 Nm/29.5 lbf. ft. |
Connect wiring harness plug to oil pressure switch. Check engine oil level and, if necessary, correct. |