Vauxhall Workshop Service and Repair Manuals

Ribbed V-belt Tension Roller, Remove and Install (1.8 / 2.0 Ltr. Engines with Power Steering and 16 LZ2)  

  Install, Connect   

Remove air intake hose and air cleaner housing - see operation "Air Cleaner Casing, Remove and Install".  

Mark the direction of motion of the ribbed V-belt. Remove tension from ribbed V-belt in the clockwise direction by means of ribbed V-belt tension roller and KM-913-A and remove ribbed V-belt.  

Remove fastening bolts (1) and (2) from power steering pump. Suspend power steering pump at suitable point.   Remove power steering pump support (3) from cylinder block.   Remove ribbed V-belt tension roller from power steering pump support.

  Install, Connect   

Attach ribbed V-belt tension roller (1) to power steering pump support - 18 Nm/6 lbf. ft.   Attach power steering pump support to cylinder block - 35 Nm/26 lbf. ft.   Install power steering pump on the bearer. Fastening bolt (2) - tightening torque 25 Nm. Fastening bolts (3) - tightening torque 30 Nm.   Place ribbed V-belt in position - tension ribbed V-belt in the clockwise direction by means of ribbed V-belt tension roller and KM-913-A. Note direction of motion of the ribbed V-belt   Install air intake hose and air cleaner housing - see operation "Air Cleaner Housing, Remove and Install".