Toothed belt tension roller, remove; and install (1.4/1.6 ltr engine except for 16 LZ2)
Toothed Belt Tension Roller, Remove and Install (1.4 / 1.6 Ltr. Engines except 16 LZ2)
Remove, Disconnect
Remove toothed belt - see operation "Toothed Belt, Remove and Install (1.4 / 1.6 Ltr. Motor except 16 LZ2)".
Remove fastening bolt (1) and remove toothed belt tension roller.
Install, Connect
Install toothed belt tension roller - ensure that the tongue (2) of the toothed belt tension roller baseplate engages in the groove (3) of the oil pump.
Install, Connect
Install toothed belt - see operation "Toothed Belt, Remove and Install (1.4 / 1.6 Ltr. Engines except 16 LZ2)".
Install toothed belt tension roller on oil pump - tightening torque 20 Nm.