vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

F2:TROUBLE CODE TABLE - TC 31 NO ENGINE RPM SIGNAL > < F2:TROUBLE CODE TABLE - TC 28 SOLENOID 2-3 VOLTAGE HIGH

F2:TROUBLE CODE TABLE

 

 

Trouble Code

Information Sensor Cause of Fault

Remedy in F0:DATA LIST No.

Trouble Code Storage when ...

29

TCC SOLENOID VOLTAGE LOW

05

·  The voltage level recognized by control unit at the relevant transmission control unit output is Low

     (less than 0.1 V),although control unit output was set at High (12 V; converter clutch solenoid valve is not actuated)

     (short circuit to ground, Ter. 31)

·   With ignition ON the fault is not recognized

·   The fault is recognized if the solenoid valve is actuated

 

If trouble code 29 was recognized, the converter clutch is not engaged.

 

 

 

 

 

 

 

 

 

 

 


Related Literature Units
-F0:Data List - Test Step 05 TCC SOLENOID

F2:TROUBLE CODE TABLE - TC 31 NO ENGINE RPM SIGNAL > < F2:TROUBLE CODE TABLE - TC 28 SOLENOID 2-3 VOLTAGE HIGH