|
01
|
SELECT MODE
F6 : ECU RESET
TC SIGNAL STATUS
|
Ignition ON
Engine OFF
Vehicle
stationary
Engage
parking brake
Selector
lever in "N".
Press key F6
in the system main menu. Follow the instructions in the TECH 1 display.
Note:
The "TC
SIGNAL STATUS" parameter indicates whether the Traction Control (TC)
system has sent at least one signal to the automatic transmission since the
last "ignition ON". If this is the case, the "TC SIGNAL
STATUS" parameter remains on "RECEIVED" until the next
"ignition OFF/ON". The selected TECH 1 test makes it possible to
now reset the relevant bit in the transmission control unit and thus return
the "TC SIGNAL STATUS" parameter to "NOT RECEIV" without
having to switch the ignition off.
|
TC SIGNAL STATUS NOT RECEIV
|
-
|
4,
35
|
