Manual Transmission and Differential. Transmission Identification 6 differently designed transmissions are used with the Model Astra-F in production. The identification F 10, F 13, F 16 or F 20 is embossed on the top of the housing.
F 10: |
with 14 NV 1) , C 14 NZ 1) |
F 13: |
with 14 SE 2) , C 14 SE, X 14 XE, X 16 SZ, 16 NZR, X 16 SZR, C 16 NZ, C 16 SE, 17 D, 17 DR, X 17 DTL |
F 15: |
with C 16 SE 3) , X 16 XEL, X 17 DTL |
F 16: |
with 17 DT, X 17 DT (TC4 EE1), C 18 NZ, C 18 XE, C 20 NE |
F 18: |
with 16 LZ2, 17 DT, X 17 DT 3) (TC4 EE1), C 18 NZ 3) , C 18 XE 3) , C 18 XEL, C 20 XE 3) X 20 XEV |
F 17: |
with C 16 SE, X 16 XEL, X 17 DTL |
F 20: |
for C 20 XE (DOHC engine) |
1) partly also equipped with F 13. 2) partly also equipped with F 10. 3) as of Model Year 94. |
|
Transmission Identification (Continued) F 10, F 13, F 16, F 20: The transmission number can be read off from the combination of letters/digits on the end shield cover.
Example: "A 126 1 2 W 372 ..." |
A |
(1) |
= |
Manufacturing plant (not for F 16) |
126 |
(2) |
= |
Number of days in year |
1 |
(3) |
= |
Year end number |
2 |
(4) |
= |
Works shift; 1 = early shift, 2 = late shift |
W |
(6) |
= |
transmission code/high ratio (not for F 20) |
C |
(6) |
= |
transmission code/low ratio |
372 |
(7) |
= |
Axle ratio |
... |
(5) |
= |
Space for numbers or letters for special application |
The identification may also be on two lines. If the end shield cover is replaced, the identification must be copied onto the new cover. |
|
F 13/F 15/F 17 gearshifts: For F 13/F 15/F 17 transmissions the transmission number is punched onto the end shield (arrow). The number combination is identical to those on transmissions F 10, F 13, F 16 and F 20 (D 7827, excluding position "5") |
|
Transmission Identification (Continued) F 18 - manual transmission: For identification of the F 18 and F 18+ transmissions, the end shield is fitted with an identification plate. The identification data is visible from the left wheel well (arrow). |
|
Transmission Identification (Continued) F 18 - manual transmission: Data on the identification plate (F18 and F18+)
I |
(1) |
Manufacturing plant |
163 |
(2) |
Number of days in year |
2 |
(3) |
Year end number |
1 |
(4) |
Shift |
|
|
1 = Early shift |
|
|
2 = Late shift |
0001 |
(5) |
Serial number |
394 |
(6) |
Drive ratio |
W |
(7) |
Transmission code |
|
|
W = Wide ratio (energy saving gear set) |
|
|
C = Close ratio (close ratio gear set) |
|
|
|