Front Fog Lamps, Service Install Vehicles with prepared "body" and "instrument panel" wiring harnesses
 Remove, Disconnect Ground cable from battery. Front panelling - see operation "Front Panelling, Remove and Install" in group "A". Saw out cut-outs along marking, deburr cut edges. As of MY '95, the outer edge of the cut-out must be sawed out parallel to the direction of travel. | 
|
 Install, Connect Insert upper clamp nut in front panelling. Insert front fog lamp in front panelling and fasten. Attach front panelling and connect wiring harness plug. | 
|
Fog lamp relay - see operation "Fog Lamp Relay, Replace". Fuse 20 A to position no. 17. | 
|
Remove, Disconnect Remove cover.
Install, Connect Switch in instrument panel, ground lead to battery. | 
|
|
