Mirror Cover, Remove and Install - as of MY '95
Remove, Disconnect Lever out mirror glass from outside, if present - disconnect wiring harness plug for mirror heating. |
|
Counterhold mirror head and fold backwards with a blow.
Important! Do not damage door. |
|
Remove, Disconnect Release mirror cover (2 retaining lugs) and remove forwards from mirror. |
|
Install, Connect Slide mirror cover from front (1) onto mirror and press onto mirror at sides (2) until retaining lugs engage. Guide mirror head past catch and hold parallel to mirror base. Engage by striking outer edge with ball of hand. Wiring harness plug for mirror heating if present. Press on mirror face. |
|
|