Spoiler Lip, Remove and Install
Remove
1. |
Remove front panelling
|
2. |
In vehicles with brake air duct: detach brake air duct on the
left (2) and right sides (1)
|
|
|
3. |
Detach spoiler lip on the left (2) and right (1) sides
Note: The spoiler lip
is fastened with 4 retaining clamps during manufacture, which are
replaced by rivets when repairs are undertaken.
• |
Remove 4x retaining clamp (4)
|
|
|
|
Install
4. |
Attach spoiler lip on the left (2) and right (1) sides
|
5. |
Drill holes for rivets
Note: Drill 1 hole
respectively instead of the retaining clamps
|
6. |
Rivet spoiler lip in position on the left and right sides
• |
Rivet 4x blind rivet (3)
|
|
|
|
7. |
For vehicles with brake air duct: attach brake air duct on the
left and right side
|
8. |
Attach front panelling
|
|