|
Airbag Unit - Driver's Side, Remove and
Install
Caution
Disconnect battery and wait 1 minute until the capacitor has
discharged.
 Remove
Airbag Unit – MKM-604-29, carefully lift airbag unit.
Release and disconnect airbag wiring harness plug.
Caution
|
Always set aside airbag unit with padded side upwards!
Install
Wiring harness plug, driver's side airbag unit to steering wheel
– tightening torque 8 Nm / 6 lbf. ft., connect battery.
|
|
|
