|
Oil Filter, Replace
 Remove
|
Remove lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
Remove oil filter with KM-726-A (1) – place collecting
basin underneath.
|
|
Install
Fill oil filter with engine oil and lubricate seal ring.
Attach oil filter to thermostat housing (engine oil cooling)
– tightening torque – 15 Nm / 11 lbf. ft.
Install lower engine compartment cover – see operation
"Lower Engine Compartment Cover, Remove and Install" in group
"A".
Check engine oil level and correct if necessary.
|
