Flywheel, Remove and Install
Remove
Remove transmission and clutch thrust plate - see operation
"Removing and installing transmission (F13/F17/F18)" and "Removing
and installing transmission (F23)" or "Removing and installing
transmission (F35)" and "Removing and installing thrust plate and
clutch disk (F13/F17/F18/F23/F35)" in group "K".
Counterhold flywheel with KM-652 (1) and remove from
crankshaft.
|
|
Install
Attach flywheel to crankshaft with new bolts – tightening
torque 45 Nm / 33 lbf. ft. + 30° + 15°. Lock flywheel with
KM-652 (2) when tightening.
Install transmission and clutch thrust plate - see operation
"Removing and installing transmission (F13/F17/F18)" and "Removing
and installing transmission (F23)" or "Removing and installing
transmission (F35)" and "Removing and installing thrust plate and
clutch disk (F13/F17/F18/F23/F35)" in group "K".
|