|
Remove air cleaner housing with air intake cover – see
illustration "Air Ducts (X 16 SZR)". Disconnect wiring harness plug
for crankshaft pulse pick-up (1). Remove cable for crankshaft pulse
pick-up (2) from the rear toothed belt cover. Remove crankshaft
pulse pick-up (3) from bracket.
Install
Attach crankshaft pulse pick-up to bracket – 8 Nm / 6 lbf.
ft. Insert crankshaft pulse pick-up cable in rear toothed belt
cover. Connect wiring harness plug for crankshaft pulse pick-up
– ensure that cable routing is correct.
Install air cleaner housing with air intake cover – see
illustration "Air Ducts (X 16 SZR)".
Inspect
Check gap between crankshaft pulse pickup and increment disc
– see operation "Gap between Crankshaft Pulse Pickup and
Increment Disc, Check (X 16 SZR)".
|
