Temperature sensor, evaporator, remove and
install
Remove
1. |
Remove condensation drain
|
2. |
Remove central console
|
3. |
Remove air distribution rear footwell (1)
|
|
|
|
4. |
Detach and remove heater core cover
• |
Unscrew 4x bolt (1) and 4x bolt (2)
|
|
|
5. |
Remove evaporator temperature sensor (1)
• |
Detach and remove temperature sensor by twisting through
90°
|
• |
Separate wiring harness plug (2)
– |
Release and disconnect wiring harness plug
|
|
|
|
|
Install
6. |
Install temperature sensor
• |
Connect wiring harness plug.
|
• |
Fit temperature sensor and lock by twisting through 90°
|
|
9. |
Fit condensation drain
|
|