vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Outside Temperature Sensor > < Temperature sensor, footwell air outlet, remove and install - ECC and SAC

Temperature sensor, evaporator, remove and install

  Remove

1.   Remove condensation drain
  • LHD
  • RHD
2.   Remove central console
3.   Remove air distribution rear footwell (1)
Object Number: 3446408  Size: DEFAULT


Object Number: 3446400  Size: DEFAULT

4.   Detach and remove heater core cover
•   Unscrew 4x bolt (1) and 4x bolt (2)

5.   Remove evaporator temperature sensor (1)
•   Detach and remove temperature sensor by twisting through 90°
•   Separate wiring harness plug (2)
Release and disconnect wiring harness plug
Object Number: 3446409  Size: DEFAULT


  Install

6.   Install temperature sensor
•   Connect wiring harness plug.
•   Fit temperature sensor and lock by twisting through 90°
7.   Fit heater core cover
•   Tighten 8x bolt
8.   Fit central console
9.   Fit condensation drain
  • LHD
  • RHD

Outside Temperature Sensor > < Temperature sensor, footwell air outlet, remove and install - ECC and SAC