Temperature sensor, footwell air outlet, remove
and install - ECC and SAC
Remove
Important: The next 3 stages only
apply to vehicles with LHD
|
1. |
Remove radio
|
|
2. |
Detach inner panelling for lower left instrument panel
padding
|
3. |
Remove air duct for footwell left side (3)
• |
Remove body-bound rivet (2)
|
|
|
|
Important: The next 3 stages only
apply to vehicles with RHD.
|
4. |
Remove glove compartment
• |
Separate wiring harness plug
|
|
5. |
Remove inner panelling footwell passenger's side
|
6. |
Remove passenger's side footwell air duct
• |
Remove body-bound rivet (3)
|
|
|
|
7. |
Remove temperature sensor for air outlet footwell (1)
|
8. |
Separate wiring harness plug (2) temperature sensor
• |
Release and disconnect wiring harness plug
|
|
|
Install
9. |
Connect wiring harness plug temperature sensor
|
10. |
Install temperature sensor air outlet footwell
• |
Insert temperature sensor and lock by twisting through
90°
|
|
Important: The next 3 stages only
apply to vehicles with LHD
|
11. |
Install air duct for left side footwell
• |
Install body-bound rivet
|
|
12. |
Attach inner panelling for lower left instrument panel
padding
|
Important: The next 3 stages only
apply to vehicles with RHD.
|
14. |
Install passenger's side footwell air duct
• |
Install body-bound rivet
|
|
15. |
Install inner panelling footwell passenger's side
|
16. |
Install glove compartment
• |
Connect wiring harness plug.
|
|
|