|
Temperature sensor, headroom air outlet, remove
and install - ECC and SAC
 Remove
|
| 1. |
Remove glove compartment
| • |
Separate wiring harness plug
|
|
| 2. |
Remove passenger's side footwell air duct
| • |
Remove body-bound rivet (2)
|
|
| 3. |
Remove inner panelling on instrument panel padding, lower
passenger's side
|
|
| 4. |
Unclip holder and control unit for tyre pressure control system
(2)
Note: Only for vehicles
with tyre pressure control system.
|
| 5. |
Remove temperature sensor (1) air duct headroom
| • |
Detach and remove temperature sensor by twisting through
90°
|
| • |
Remove wiring harness from bracket
|
| • |
Separate wiring harness plug
| – |
Release and disconnect wiring harness plug
|
|
|
|
|
Install
| 6. |
Attach temperature sensor air duct headroom
| • |
Insert temperature sensor and lock by twisting through
90°
|
| • |
Fit wiring harness in bracket
|
|
| 7. |
Clip in holder for control unit for tyre pressure control
system
Note: Only for vehicles
with tyre pressure control system.
|
| 8. |
Fit inner panelling on instrument panel padding, lower
passenger's side
|
| 9. |
Fit passenger's side footwell air duct
| • |
Clip in body-bound rivet
|
|
| 10. |
Install glove compartment
| • |
Connect wiring harness plug.
|
|
|
