|
The damping behaviour is too hard
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Function Checks
- Check the following component for contamination, deformation and other damage:
Shock absorber
wheel suspension, front left
wheel suspension, front right
-
wheel suspension, rear right
wheel suspension, rear left
Check tyre condition and size
Data List
- Select the following Functional System on the diagnostic tester:
CDC (Continuous Damping Control)
- Check the following data list parameters:
-
-
Actuator Tests
- Perform the following Actuator Tests:
-
After successful test/fault repair proceed to the next test step
|
|
The damping behaviour is too soft
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Function Checks
- Check the following component for damage and contamination:
Shock absorber
wheel suspension, front left
wheel suspension, front right
-
wheel suspension, rear left
wheel suspension, rear right
Check tyre condition and size
- Select the following Functional System on the diagnostic tester:
CDC (Continuous Damping Control)
- Check the following data list parameters:
-
-
Actuator Tests
- Perform the following Actuator Tests:
-
After successful test/fault repair proceed to the next test step
|
|
Sport mode can not be activated or deactivated
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
CDC (Continuous Damping Control)
- Check the following data list parameters:
Actuator Tests
- Perform the following Actuator Tests:
-
After successful test/fault repair proceed to the next test step
|
