Replace CDC spring strut sensor
Remove
1. |
Detach corresponding front wheel.
|
2. |
Disconnect CDC spring strut sensor wiring harness plug
• |
Slide primary lock mechanism (1) downward
|
• |
Twist secondary lock mechanism (2) in direction of arrow
|
• |
Disconnect CDC spring strut sensor wiring harness plug from
wiring harness
|
|
|
|
3. |
Remove left front CDC spring strut sensor
|
Install
4. |
Install left front CDC spring strut sensor 6 Nm
|
5. |
Connect CDC spring strut sensor wiring harness plug to wiring
harness
• |
Twist secondary lock mechanism
|
• |
Slide primary lock mechanism upward
|
|
6. |
Fit front wheel 110 Nm
|
|