Test
|
Work Order Description
|
Nominal Value
|
T001
|
Tester Display Return Pump Relay Test
|
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
|
|
Return pump operating
|
Note:
The return pump will be automatically deactivated after 3 s .
|
Return pump deactivated
|
Concerned Terminals: ABS: -
|
|
T002
|
Tester Display Front Left Solenoid Valve Test
|
- Vehicle jacked-up so that the wheels can turn freely
- Parking brake released
- Selector lever in position N
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.
Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.
|
Test okay?
|
Concerned Terminals: ABS: -
|
|
T003
|
Tester Display Front Right Solenoid Valve Test
|
- Vehicle jacked-up so that the wheels can turn freely
- Parking brake released
- Selector lever in position N
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.
Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.
|
Test okay?
|
Concerned Terminals: ABS: -
|
|
T004
|
Tester Display Rear Left Solenoid Valve Test
|
- Vehicle jacked-up so that the wheels can turn freely
- Parking brake released
- Selector lever in position N
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.
Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.
|
Test okay?
|
Concerned Terminals: ABS: -
|
|
T005
|
Tester Display Rear Right Solenoid Valve Test
|
- Vehicle jacked-up so that the wheels can turn freely
- Parking brake released
- Selector lever in position N
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.
Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.
|
Test okay?
|
Concerned Terminals: ABS: -
|
|
T006
|
Tester Display ABS Telltale Test
|
- Ignition ON
- Engine OFF
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
|
|
ABS telltale ON
|
|
ABS telltale OFF
|
Concerned Terminals: -
|
|
T007
|
Tester Display TC/ESP Telltale Test
|
- Ignition ON
- Engine OFF
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
|
|
|
ESP Telltale ON
|
Note:
Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
|
ESP Telltale OFF
|
Concerned Terminals: -
|
|
T008
|
Tester Display Front Left ESP Channel Test
|
- Vehicle jacked-up so that the wheels can turn freely
- Parking brake released
- Selector lever in position N
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.
Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.
-
Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
|
Test okay?
|
Concerned Terminals: ABS: -
|
|
T009
|
Tester Display Front Right ESP Channel Test
|
- Vehicle jacked-up so that the wheels can turn freely
- Parking brake released
- Selector lever in position N
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.
Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.
-
Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
|
Test okay?
|
Concerned Terminals: ABS: -
|
|
T010
|
Tester Display Rear Left ESP Channel Test
|
- Vehicle jacked-up so that the wheels can turn freely
- Parking brake released
- Selector lever in position N
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.
Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.
-
Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
|
Test okay?
|
Concerned Terminals: ABS: -
|
|
T011
|
Tester Display Rear Right ESP Channel Test
|
- Vehicle jacked-up so that the wheels can turn freely
- Parking brake released
- Selector lever in position N
- Ignition ON
- Press corresponding key in the system main menu to call up Actuator-Test functions, select the desired test and confirm with ENTER . Follow the instructions in the diagnostic tester display.
Note:
During the last check in this actuator test (PRESSURE RELEASE function) - after the check of the return pump - a display inquires whether the wheel being checked can be turned.
Compared to previous requests in the actuator test, the wheel can only be turned at this point with more force than in previous checks. However, the wheel should in no case lock.
-
Depending on the vehicle/system configuration it is possible that some data list parameters or test steps, although they are listed in this checking procedure, are not shown on the diagnostic tester display. In that case, these data list parameters are not valid for this vehicle/system configuration.
|
Test okay?
|
Concerned Terminals: ABS: -
|
|