Brake Linings and Brake Discs, Check for Wear
|
Note: Substitute
adhesive films (1), obtainable from the "Service" Department are to
be used for reinstalling brake linings, attached with adhesive, on
the rear brake calliper.
|
Remove
1. |
Remove brake linings
1. |
Front Wheel Brake |
2. |
Rear Wheel Brake |
|
2. |
Measure remaining brake lining thickness with MKM-230-A (1)
|
|
|
4. |
Measure thickness of brake disc with MKM-230-A (1) at several points
Note: Permissible
tolerance of remaining brake disc thickness at various measurement
points 0.01 mm
|
|
|
6. |
Check surface condition of brake disc:
Note: If overheated
areas or scoring are present the brake disc must be very finely
ground
|
7. |
Install brake linings
- Front Wheel Brake
- Rear Wheel Brake
|
|