vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Thermostat, Remove and Install > < Replace engine oil cooler / heat exchanger

Thermostat, Remove and Install

  Remove

1.   Raise vehicle
2.   Drain coolant
•   Place collecting pan underneath.
•   Attach suitable hose to drain connection (2)
•   Open coolant drain screw (1)
Drain coolant
•   Close coolant drain screw
Object Number: 3446245  Size: DEFAULT


3.   Open bonnet
4.   Remove coolant hose (1) from thermostat housing
•   Release clamp
5.   Remove thermostat housing (2) from coolant pump
•   Unscrew 3 bolts
Object Number: 2398431  Size: DEFAULT


6.   Remove thermostat
7.   Clean sealing surfaces.

  Install

8.   Insert thermostat
9.   Attach thermostat housing to coolant pump with new seal ring
•   Tighten 3x bolt 8 Nm
10.   Attach coolant hose
•   Fasten clamp
11.   Fill and bleed cooling system LUREF_1.gif

Thermostat, Remove and Install > < Replace engine oil cooler / heat exchanger