vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Seal camshaft housing in respect of cylinder head > < Check camshaft housing for plane surface

Engine cover, remove and install

  Remove

1.   Open bonnet
2.   Remove engine cover (1)
•   Pull off engine cover
Note:   Rubber retainers (2) must remain on engine cover
Object Number: 8125513  Size: DEFAULT


  Install

3.   Install engine cover
•   Clip in 4x
4.   Close bonnet

Seal camshaft housing in respect of cylinder head > < Check camshaft housing for plane surface