Engine Oil Pressure, Check
Remove
1. |
Detach wiring harness plug (1) from oil pressure switch
|
2. |
Detach oil pressure switch (2) from oil pump
|
3. |
Place collecting basin underneath.
|
4. |
Oil Pressure, Check
• |
with KM-498-B (3) and KM-135 (4)
Note: At idling speed,
the oil pressure should be approx. 150 kPa (1.5 bar) and the oil
temperature should be >= 80 °C.
|
|
|
|
Install
5. |
Attach oil pressure switch to oil pump with new seal ring 40 Nm
|
6. |
Connect wiring harness plug to oil pressure switch.
|
7. |
Check engine oil level and correct if necessary.
|
|