vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Control Unit for Pre-Heating System, Replace > < Replace pre-heating system control unit

Sheathed Glow Plugs, Replace

  Remove

1.   Open bonnet
2.   Remove engine cover
3.   Remove 4x glow plugs with EN-48390
•   Disconnect 4x wiring harness plug, sheathed glow plug (arrows)
Object Number: 7360408  Size: DEFAULT


  Install

4.   Install 4x sheathed glow plug
•   Tighten 4x glow plugs with EN-48390 8 Nm
•   Connect 4x wiring harness plug, sheathed glow plug
5.   Install engine cover
6.   Close bonnet

Control Unit for Pre-Heating System, Replace > < Replace pre-heating system control unit