Replace high-pressure pump drive gear
Remove
2. |
Release high-pressure pump drive gear
• |
Counterhold with KM-6347 (1) in
combination with KM-956-1 (2)
|
|
|
|
3. |
Remove high-pressure pump gear
• |
Pull off high-pressure pump drive gear
– |
Counterhold with open-ended wrench (2)
|
|
|
|
|
Install
4. |
Fit high pressure pump wheel
• |
Counterhold with KM-6347 in
conjunction with KM-956-1
|
|
|