vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

B-009 Complaint: Engine Performance > < B-007 Complaint: Engine Idling

B-008 - Complaint: Engine Behaviour Under Normal Driving Conditions

Customer complaint

Remedy

Engine stalls during operation, no restart possible

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Function Checks

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:




    This data list parameter is only valid if the concerned component is installed.

After successful test/fault repair proceed to the next test step

Done:

Engine stalls during operation, restart possible

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Function Checks

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:


    This data list parameter is only valid if the concerned component is installed.

After successful test/fault repair proceed to the next test step

Done:

Erratic engine operation, reproducible misfire

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Function Checks

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:



    -



    -



    -


Actuator Tests

  • Perform the following Actuator Tests:

After successful test/fault repair proceed to the next test step

Done:

Jerky engine operation

The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.

Function Checks

Data List

  • Select the following Functional System on the diagnostic tester:
    Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
  • Check the following data list parameters:



    -



    -



    -

Actuator Tests

  • Perform the following Actuator Tests:

After successful test/fault repair proceed to the next test step

Done:





B-009 Complaint: Engine Performance > < B-007 Complaint: Engine Idling