|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Function Checks
- Check intake system/charge air hoses for leaks (secondary air, porosity and blockages)
- Check connected hoses and tubes for kinks, damage etc.
- Check the hose clamps at the intake-air system / charge-air system for correct fitting.
- Check air filter for fouling and correct mounting.
- Check air mass meter for fouling.
- Check exhaust system for leakage
Actuator Tests
- Select the following Functional System on the diagnostic tester:
Electronic Diesel Injection System EDC 16C9/16C39, Z 19 DT, Z 19 DTH, Z 19 DTL
Perform the following Actuator Tests:
After successful test/fault repair proceed to the next test step
|
|
