Field Remedy: 2331
| Subject: |
Engine Z19DT/L - Failure code P0340(28),
wrong camshaft signal |
| Models: |
Engines: |
Option: |
| Astra-H 2007...,Zafira-B 2007...,Vectra-C
2007...,Signum 2007... |
Z19DT| Z19DTL,Z19DT| Z19DTL,Z19DT|
Z19DTL,Z19DT| Z19DTL |
|
| Complaint: |
SVS control illuminates, failure code P0340
(28) set in ECU, engine stalls in idle condition, |
| Cause: |
Crankshaft gear damaged. |
| Production: |
|
Remedy:
In case of customer complaint please check engine timing precisely
according to TIS 2000 service instruction. If timing was found NOK,
please correct accordingly. Therefore please check crankshaft gear
for any damage (as shown in picture I, 1).
Crankshaft gear needs to be removed from the shaft and replaced if
damaged. Partnumber: 93178820 / cataloguenumber: 56 36 345.
Production wise a raised fastening torque has been implemented as
of engine no Z19DT5938366. This shall be considered during the
installation of the new crankshaft gear. The fastening torque has
been raised to 340 Nm.
| FunctionalGroup: |
J - Engine |
| Complaint Group: |
19 - Poor Engine Driveability |
| Trouble Code: |
P0340(28) |
|
