Customer complaint
|
Remedy
|
The engine can not be started in selector lever position P, N
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
AF 22-4 Electronic 4-Speed Automatic Transmission
- Check the following data list parameters:
-
- Select the following Functional System on the diagnostic tester:
IPC (Instrument)
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
The engine can be started in selector lever position R, D
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
AF 22-4 Electronic 4-Speed Automatic Transmission
- Check the following data list parameters:
-
- Select the following Functional System on the diagnostic tester:
IPC (Instrument)
- Check the following data list parameters:
After successful test/fault repair proceed to the next test step
|
|
While the brake pedal is not actuated, the shift lever can be moved from position P to position R, N, D
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
IPC (Instrument)
- Check the following data list parameters:
- Select the following Functional System on the diagnostic tester:
AF 22-4 Electronic 4-Speed Automatic Transmission
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
While the brake pedal is actuated, the shift lever can not be moved from position P to position R, N, D
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Data List
- Select the following Functional System on the diagnostic tester:
IPC (Instrument)
- Check the following data list parameters:
- Select the following Functional System on the diagnostic tester:
AF 22-4 Electronic 4-Speed Automatic Transmission
- Check the following data list parameters:
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|
The driving position displayed next to the selector lever does not match the engaged driving position in the transmission.
|
The following test steps must be performed in the given order. If a fault is found in one test step, the subsequent test steps can be skipped.
Perform the following troubleshooting:
After successful test/fault repair proceed to the next test step
|
|