Special Service Tools
KM-113-2
|
Bracket
|
Mount for transmission with KM-6115 and for end shield
(F13/F13+/F17+) with KM-552
|
|
|
KM-161-B
|
Bearing Puller
|
Extracting various transmission components
|
|
|
KM-248
|
Remover
|
Removing various bearings from clutch housing with KM-248-2 and
KM-248-4 (F23)
|
|
|
KM-277
|
Pressure sleeve
|
Pressing on various transmission components (F13/F13+/F17+)
|
|
|
KM-303
|
Removal Sleeve
|
Place sleeve underneath when driving tapered roller bearing
outer race from bearing ring (F13/F13+/F17+)
|
|
|
KM-304
|
Remover
|
Driving outer race of tapered roller bearing out of transmission
with KM-451. Place KM-502-A underneath (F13/F13+/F17+)
|
|
|
KM-305
|
Remover / Installer
|
Driving tapered roller bearing outer races out of the
transmission. Removing bearing flange and bearing race with KM-303
and KM-451 (F17+)
|
|
|
KM-307-B
|
Remover Plate
|
Pressing out various transmission components (F13/F13+/F17+)
|
|
|
KM-308
|
Remover / Installer
|
Driving roll pins for shift rod and shift fork in and out
(F13/F13+/F17+)
|
|
|
KM-311
|
Installer Sleeves
|
Pressing on various transmission components (F13/F13+/F17+)
|
|
|
KM-328-B
|
Remover
|
Drawing locking plugs out of end shield (F13/F13+/F17+)
|
|
|
KM-334
|
Assembly Sleeves
|
Pressing spacer washer onto main shaft (F13/F13+/F17+)
|
|
|
KM-396
|
Ring pliers
|
Removing/installing various retaining rings (F13/F13+/F17+)
|
|
|
KM-407-A
|
Ring Installer
|
Pressing ball bearing from gear cluster (F13/F13+)
|
|
|
KM-443-B
|
Ring pliers
|
Retaining rings for fixing main shaft and drive shaft to end
shield (F13/F17+)
|
|
|
KM-446
|
Installer Drift
|
Installing axle shaft seal rings (F 13/F13+/F 17+)
|
|
|
KM-447
|
Remover / Installer
|
Screwing/unscrewing bearing race in/from transmission
(F13/F13+/F17+)
|
|
|
KM-451
|
Remover / Installer
|
Pressing tapered roller bearing outer races in and out
(F13/F13+/F17+)
|
|
|
KM-453
|
Pusher
|
Pressing tapered roller bearing inner races onto differential
housing (F13/F13+/F17+)
|
|
|
KM-454-B
|
Remover / Installer
|
Driving bearings in and out for main and drive shaft in
transmission housing and seal rings in bearing race and
transmission housing (F13/F13+/F17+)
|
|
|
KM-456
|
Centring drift
|
Pre-installation of differential (F13/F13+/F17+)
|
|
|
KM-458-A
|
Mounting Drift
|
Clamping differential in vice (F13/F13+/F17+)
|
|
|
KM-473
|
Sleeve
|
To press on 5th gear (driving/driven) (F17+)
|
|
|
KM-500-A
|
Remover / Installer
|
Detaching bearing from differential with KM-500-5 in conjunction
with KM-6118 (F17+)
|
|
|
KM-507-C
|
Remover
|
Pressing tie rod end out of steering knuckle
|
|
|
KM-514
|
Installer Sleeve
|
Pressing various transmission components in and out
(F13/F13+/F17+/F23)
|
|
|
KM-519.
|
Installer Drift
|
Installation of the axle shaft seal rings (F23)
|
|
|
KM-522
|
Pusher
|
Pressing tapered roller bearing inner races onto differential
housing (F13/F13+/F17+/F23)
|
|
|
KM-523
|
Remover / Installer
|
Driving in needle bearing for drive shaft (F17+)
|
|
|
KM-527-A
|
Adjuster
|
Adjusting transmission shift linkage (F13/F13+/F17+/M20/M32)
|
|
|
MKM-536-A
|
Friction Coefficient Meter
|
Measuring the breakaway torque in conjunction with KM-6037 or
KM-995-A (F13/F13+/F17+)
|
|
|
KM-552
|
Installer
|
Holding the end shield during assembly work (F13/F13+/F17+)
|
|
|
KM-553-A
|
Remover
|
Remove gear wheel, 5th gear (driving) from drive shaft
(F13/F13+/F17+)
|
|
|
KM-554
|
Installer
|
Pressing on gear wheel, 5th gear (F13/F13+/F17+)
|
|
|
KM-556-A
|
Puller Set
|
Drawing out bearing for main and drive shaft in transmission
housing (F13/F13+/F17+)
|
|
|
KM-557-A
|
Puller Set
|
Drawing the axle shaft seal rings out of the transmission
housing (F13/F13+/F17+/F23/M20/M32)
|
|
|
KM-559-A
|
Puller
|
For extracting 5th gear synchro body with shift sleeve and 5th
gear gear wheel. Also extracting transmission housing (F17+)
|
|
|
KM-569-A
|
Plug Remover
|
Prising out the hollow pin on the relay point
(F13/F13+/F17+)
|
|
|
KM-577
|
Installer
|
Pressing 3rd/4th gear synchro body onto main shaft
(F13/F13+/F17+)
|
|
|
MKM-599
|
Inner Extractor
|
Drawing out bearing for main shaft from transmission housing
(F13/F13+/F17+)
|
|
|
KM-619
|
Remover / Installer
|
Drive in seal ring for gearshift rod
|
|
|
KM-621-A
|
Installer
|
Measuring thrust collar and pre-tensioning of differential
tapered roller bearing with KM-621-23 (F23)
|
|
|
KM-652
|
Flywheel Holder
|
Locking the flywheel to remove and install the clutch
(F13/F13+/F17+/F23/M20/M32)
|
|
|
KM-727
|
Remover
|
Knocking locking plugs out of end shield with KM-328-B
(F13/F13+/F17+)
|
|
|
KM-736
|
Guide Bolt
|
Centring the clutch (F23)
|
|
|
MKM-883-1-A
|
Engine Bridge
|
Holding/lowering/raising the engine
(F13/F13+/F17+/F23/M20/M32)
|
|
|
MKM-883-2
|
Retainer plate
|
To hold engine in conjunction with MKM-883-1-A and MKM-883-3
when removing transmission
|
|
|
MKM-883-3
|
Accessories for MKM-883-1-A
|
To remove transmission in conjunction with MKM-883-2
|
|
|
KM-904
|
Base Frame
|
Removing and installing various vehicle components with
additional adapters
|
|
|
KM-915
|
Spreading tool
|
Removing guide joint from steering knuckle
|
|
|
KM-982
|
Mount
|
Gearbox cover mount when overhauling manual transmission
(F13/F13+/F17+)
|
|
|
KM-983
|
Remover
|
Removing engaging sleeve for intermediate lever and bolt
connecting link with KM-328-B (F13/F13+/F17+)
|
|
|
KM-6001-B
|
Engine Mount
|
Centring the engine when removing the transmission
(F13/F13+/F17+/F23/M20/M32)
|
|
|
KM-6037
|
Adapter
|
Turn differential gear to check bearing prestress in conjunction
with MKM-536-A (F13/F13+/F17+ up to MY 2007.5)
|
|
|
KM-6042
|
Dismantling Key
|
To remove shift cables from shift guide assembly (F23)
|
|
|
KM-6059
|
Assembly Sleeve
|
Assembly of central release (F23)
|
|
|
KM-6101
|
Remover
|
Removing intermediate shaft cover in conjunction with KM-328-8
(F23)
|
|
|
KM-6102
|
Installer
|
Installing intermediate shaft cover in conjunction with KM-523-1
(F23)
|
|
|
KM-6110
|
Remover
|
Removal of main shaft bearing from clutch housing (F23)
|
|
|
KM-6111
|
Installer
|
Installing main shaft bearing in clutch housing in conjunction
with KM-523-1 (F23)
|
|
|
KM-6112
|
Installer
|
Spacer sleeve for drive shaft in clutch housing in conjunction
with KM-523-1 (F23)
|
|
|
KM-6113
|
Remover
|
Differential bearing outer race in transmission housing and
clutch housing (F23)
|
|
|
KM-6114
|
Installer
|
Installing differential bearing outer race in transmission and
clutch housings in conjunction with KM-523-1 (F23)
|
|
|
KM-6115
|
Bracket for Clutch Housing
|
Transmission mount in conjunction with KM-113-2
(F13/F13+/F17+/F23/M20/M32)
|
|
|
KM-6116
|
Remover / Installer
|
Removing and installing transmission shafts out of/in
transmission housing bearing and separating main housing and clutch
housing (F23)
|
|
|
KM-6117
|
Transmission Shaft Holder
|
Locking drive shaft to release shaft unions (F23)
|
|
|
KM-6118
|
Remover
|
Removing differential bearings in conjunction with workshop
press and KM-500-5 (F23)
|
|
|
KM-6119
|
Installer
|
Pressing intermediate shaft bearing into clutch housing in
conjunction with KM-523-1 (F23)
|
|
|
KM-6120
|
Installer
|
Driving drive shaft bearing into clutch housing in conjunction
with KM-523-1 (F23)
|
|
|
KM-6121
|
Assembly Sleeve
|
Securing drive shaft synchro body to prevent it falling apart
(F23)
|
|
|
KM-6122
|
Remover
|
Removing drive shaft bearing out of transmission housing in
conjunction with KM-523-1 (F23)
|
|
|
KM-6123
|
Remover
|
Removing drive shaft bearing out of transmission housing in
conjunction with KM-523-1 (F23)
|
|
|
KM-6126
|
Remover
|
Removing intermediate shaft from bearing in conjunction with
KM-523-1 (F23)
|
|
|
KM-6127
|
Tool Kit
|
Overhauling transmission F23, contains KM-6110 to KM-6123 and
KM-6126 (F23)
|
|
|
KM-6146
|
Measurement sleeve
|
Measuring main shaft in conjunction with KM-621-23 (F23)
|
|
|
KM-6155
|
Guide Domes
|
Centring the end shield during removal and installation
(F13/F17+)
|
|
|
KM-6157
|
Assembly Sleeve
|
Removing and installing central release (F13/F13+/F17+)
|
|
|
KM-6173
|
Engine Mount
|
Centring the engine when removing the transmission
(F13/F13+/F17+/F23)
|
|
|
MKM-6174-A
|
Bleeding device
|
Bleeding clutch actuation in conjunction with brake bleeding
tool (F13/F13+/F17+/F23/M20/M32)
|
|
|
KM-6219
|
Pressure sleeve
|
For pushing gear wheels onto the main shaft and intermediate
shaft (F23)
|
|
|
KM-6220
|
Drift
|
For driving main and drive shafts out of gearwheels (F23)
|
|
|
KM-6221
|
Mount
|
Intermediate shaft mount for pressing out intermediate shaft
(F23)
|
|
|
KM-6222
|
Mount
|
Drive shaft mount for pressing out drive shaft (F23)
|
|
|
KM-6223
|
Mount
|
Main shaft mount for pressing out main shaft (F23)
|
|
|
KM-6224
|
Mount
|
Main shaft mount for pressing out main shaft in conjunction with
KM-6223-1 (F23)
|
|
|
KM-6263
|
Remover / Installer
|
Securing complete clutch, removing clutch, centring the clutch
discs for installation.
|
|
|
KM-6335
|
Thrust piece
|
Pushing the transmission shaft out of the end shield (F17+)
|
|
|
KM-6336
|
Installer
|
Pressing transmission shaft bearings into the end shield with
KM-523-1 (F17+)
|
|
|
KM-6337
|
Installer
|
Pushing the transmission shafts in with KM-6338, supporting the
transmission shafts when pushing on the main shaft sleeve with
KM-6339 (F17+)
|
|
|
KM-6338
|
Installer
|
Supporting the bearings when the transmission shafts are being
pushed in, used with KM-6337 (F17+)
|
|
|
KM-6339
|
Installer
|
Pushing sleeves onto the main transmission shaft, supported by
KM-6337 (F17+)
|
|
|
KM-6390
|
Centring Equipment
|
Aligning (removing and installing) the front axle body with the
vehicle underbody in conjunction with KM-904
|
|
|
KM-J-37228
|
Disconnector
|
Removing transmission housing cover from transmission housing
(F23)
|
|
|
DT-47648
|
Transmission holder
|
Removing, installing and holding transmission
|
|
|
DT-48659
|
Installer
|
Guide and installation of transmission control unit (M20
MTA)
|
|
|
DT-48659
|
Remover
|
Transmission control module removal (M20 MTA)
|
|
|
DT-48783
|
Special wrench E18
|
Unscrew and tighten the upper gearbox bolts (M32)
|
|
|
DT-49113
|
Adapter
|
Turn differential gear to check bearing prestress in conjunction
with MKM-536-A from MY 2008) (F17+/F17+MTA)
|
|
|
DT-49114
|
Install main shaft bearings
|
In conjunction with KM-523-1, from MY 2008 (F17+, F17+MTA)
|
|
|
|