|
Shift Linkage, Adjust (F 23)
 Remove
|
| 1. |
Detach cover of manual shift lever (1)
| • |
Unclip cover of manual shift lever at the front (arrows) from
central console
|
| • |
Prop up cover of manual shift lever with cover frame
|
|
|
|
Important: Only open the clamping
piece as far as the notch (arrow).
If opened further (over-stretching) the clamping piece can be
damaged!
|
| 2. |
Unlock 2x gearshift cable on the gearshift lever assembly
| • |
Unlock clamping piece (1) for selector link
Note: Open clamping
piece using a small screwdriver.
|
| • |
Unlock clamping piece (2) for manual gearshift link
Note: Open clamping
piece using a small screwdriver.
|
|
|
| 3. |
Move transmission to "neutral" position
|
|
| 4. |
Lock manual shift lever in adjustment position
|
|
Install
|
| 5. |
Lock 2x clamping piece (arrow)
Note: Do not change
position of manual gearshift lever.
| • |
Lock selector connection clamping piece (1) by compressing
|
| • |
Lock shift connection clamping piece (2) by compressing
|
|
|
|
| 6. |
Release manual gearshift lever from adjustment position
|
|
|
| 7. |
Attach cover of manual shift lever (1)
| • |
Insert cover of manual gearshift lever at the rear in the
central console
|
| • |
Clip cover of manual gearshift lever into the central console
at the front (arrows)
|
|
|
|
