DTC
|
Diagnostic Trouble Code Storage Condition
|
B1000
|
System High Voltage Counter Overrun (System Locked)
|
Only GID/CID :
- The control unit recognises an internal control unit malfunction
|
Concerned Terminals: -
|
Remedy:
|
B3562
|
Mode Key Stuck
|
- Key is stuck
- Above condition must be fulfilled for at least 60 s .
|
Concerned Terminals: -
|
Remedy:
|
B3567
|
Set Key Stuck
|
- Set key is stuck and deactivated
- Above condition must be fulfilled for at least 60 s .
|
Concerned Terminals: -
|
Remedy:
|
U1500
|
Graphical Interface Communication Malfunction
|
Only GID :
- The control unit recognises the malfunction of the circuit via an internal evaluation logic.
- Incorrect voltage level at control unit terminal DIS: 8, 9, 24 (XC23)
|
Concerned Terminals: DIS: 8, 9, 24 (XC23)
|
Remedy:
|
U2116
|
Invalid Data from IPC (Instrument)
|
- The control unit recognises that the IPC sends invalid data by using an internal evaluation logic.
|
Concerned Terminals: -
|
Remedy:
|
U2139
|
Invalid Data from CIM (Steering Column Module)
|
- The control unit recognises that the CIM sends invalid data by using an internal evaluation logic.
|
Concerned Terminals: -
|
Remedy:
|
U2140
|
Invalid Data from UEC (Underhood Electrical Centre)
|
- The control unit recognises that the UEC sends invalid data by using an internal evaluation logic.
|
Concerned Terminals: -
|
Remedy:
|
U2141
|
Invalid Data from REC (Rear Electrical Centre)
|
- The control unit recognises that the REC sends invalid data by using an internal evaluation logic.
|
Concerned Terminals: -
|
Remedy:
|
U2147
|
Invalid Data from AHS (Add On Heater)
|
- The control unit recognises that the AHS sends invalid data by using an internal evaluation logic.
|
Concerned Terminals: -
|
Remedy:
|