Vauxhall Workshop Service and Repair Manuals

DTC

Diagnostic Trouble Code Storage Condition

System High Voltage Counter Overrun (System Locked)

Only GID/CID :

• The control unit recognises an internal control unit malfunction

Mode Key Stuck

• Key is stuck
• Above condition must be fulfilled for at least 60 s .

Set Key Stuck

• Set key is stuck and deactivated
• Above condition must be fulfilled for at least 60 s .

Graphical Interface Communication Malfunction

Only GID :

• The control unit recognises the malfunction of the circuit via an internal evaluation logic.
• Incorrect voltage level at control unit terminal DIS: 8, 9, 24 (XC23)

Invalid Data from IPC (Instrument)

• The control unit recognises that the IPC sends invalid data by using an internal evaluation logic.

Invalid Data from CIM (Steering Column Module)

• The control unit recognises that the CIM sends invalid data by using an internal evaluation logic.

Invalid Data from UEC (Underhood Electrical Centre)

• The control unit recognises that the UEC sends invalid data by using an internal evaluation logic.

Invalid Data from REC (Rear Electrical Centre)

• The control unit recognises that the REC sends invalid data by using an internal evaluation logic.

Invalid Data from AHS (Add On Heater)

• The control unit recognises that the AHS sends invalid data by using an internal evaluation logic.