vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Relay Support, Rear of Side Panel, Replace L48 / L 08 > < Tow Bar Control Unit, Replace L67

Replace park pilot control unit (PAS) - L67

Note:   When replacing the control unit, before removing the control unit carry out a "Reset" using TECH2.

  Remove

1.   Disconnect battery.
2.   Remove left side luggage compartment panelling LUREF_1.gif
Object Number: 10677954  Size: DEFAULT

3.   Remove park pilot control unit (PAS)
•   Disconnect rear electronics module compact plug (1)
•   Unclip control unit
Undo 2 clips (2)
•   Release 2x wiring harness plugs (3) and disconnect

  Install

4.   Install park pilot control unit (PAS)
•   Connect and lock 2x wiring harness plugs
•   Clip in control unit
•   Connect compact plug to rear electronics module
5.   Install left side luggage compartment panelling LUREF_1.gif
6.   Connect battery.
7.   Program volatile memories
Note:   When replacing the control unit, before removing the control unit carry out a "Reset" using TECH2.

Relay Support, Rear of Side Panel, Replace L48 / L 08 > < Tow Bar Control Unit, Replace L67