Replace light switch unit
Remove
1. |
Release light switch centre
Note: To release the
light switch unit, press in rotary switch (1) in position "0", move
depressed rotary switch to centre position (3), light switch unit
(2) is released.
|
|
|
2. |
Withdraw light switch unit
|
3. |
Disconnect wiring harness plug for light switch unit
• |
Disconnect wiring harness plug
– |
Press down secondary retainer (2)
|
|
|
|
|
4. |
Remove decor strip
Note: Only when
replacing the light switch unit.
• |
Unclip 8x clip (arrows)
|
|
|
|
Install
5. |
Connect wiring harness plug for light switch unit
|
6. |
Insert light switch unit
|
7. |
Release light switch unit
Note: Turn rotary
switch (1) to position "0", light switch lock (2) protrudes.
|
|
|
|