Replace tailgate wiper motor
Remove
1. |
Unclip fastening cover for rear screen wiper arm (1).
|
2. |
Remove rear wiper arm
• |
Unscrew nut and remove wiper arm
– |
Apply KM-6166 (2) and remove rear
wiper arm by tightening the removal screw (3) (arrow)
|
|
|
|
|
3. |
Remove tailgate inner panelling downwards
|
4. |
Unclip wiring harness plug (1) for wiper motor and
disconnect
• |
Disconnect wiring harness plug
– |
Release wiring harness plug and disconnect.
|
|
|
|
|
Install
7. |
Connect wiper motor wiring harness plug
• |
Connect wiring harness plug
|
|
8. |
Fit tailgate inner panelling at base
|
10. |
Clip in fastening cover for rear screen wiper arm
|
|