Technical Service Bulletin |
2850 |
Subject: |
Rear end panel - Incomplete body sealing
seam |
Brand: |
Model: |
Model Year: |
VIN: |
Engine: |
Transmission: |
from |
| |
to |
from |
| |
to |
Opel, Vauxhall |
Astra J Sports Tourer |
2010 |
|
2011 |
|
|
|
All |
|
Option |
|
Complaint |
Humidity inside the vehicle. |
Cause |
Inadequate application of sealing seam on
the rear end panel. |
Production |
|
Remedy
In case of customer complaint check the sealing of the rear end panel
for correct application and replaced it if necessary.
Working Procedure:
1. Raise vehicle
2. Check if sealant has been applied correctly
Note:
Picture I shows correct applied sealant.
No gaps should be present in the sealing seam.
3. Remove and replace incorrectly or insufficient applied sealant
4. Lower vehicle
Spare-Parts: Part-No.: Catalogue-No.:
Sealant Body Protection 93165581 15 05 003
Labour Times: TC: Hours:
U3 285 00 Remove and replace 90 SA
rear end panel sealing
seam
The costs for this repair will be covered during warranty and policy.
For policy please refer to the Policy Guideline (WebPG/Kuugel).
The regular Warranty Procedure will apply.
FunctionalGroup |
A - Body |
Complaint Group |
11 - Loose or Comes off |
Trouble Code |
|
|