Headlamp Bracket Replacement (5-Door Hatchback 68)
Removal Procedure
2. |
There are 5 replacement
brackets (1) on each headlamp. |
3. |
Bracket 1: Cut the bracket
along the marked line (1) on the housing. |
4. |
Bracket 2: Cut the bracket
along the marked gluing channel (1). |
5. |
Bracket 3: Cut the bracket
along the marked line (1) on the housing. |
6. |
Bracket 4: Cut the bracket
along the marked line (1). |
7. |
Bracket 5: Cut the bracket
along the marked geometry (1) on the housing. |
Installation Procedure
1. |
Bracket 5: Screw the bracket
(1) on through the encircled hole (2). |
2. |
Bracket 4: Screw the bracket
(1) on through both encircled holes (2) (one screw from each
side). |
3. |
Bracket 3: Screw the bracket
(1) on through the encircled holes (2). |
4. |
Bracket 2: Screw the bracket
(1) on through the encircled holes (2). |
5. |
Bracket 1: Screw the bracket
(1) on through the encircled holes (2). |
|