Drive Belt Installation
Special Tools
• |
EN-48488
Holding Wrench |
For equivalent regional tools, refer to
Special Tools .
|
Note: Ensure that the
drive belt tensioner is held with EN-955-2 locking
pin .
|
1. |
Install the drive belt.
|
2. |
Move the drive belt tensioner
clockwise until EN-955-2 locking pin (2) can be
removed. Use EN-48488 wrench (1). |
3. |
Remove EN-955-2
locking pin (2) from the drive belt tensioner while holding
with EN-48488 wrench (1). |
4. |
Release tension from drive
belt tensioner and remove EN-48488 wrench (1)
. |
|