Piston and Connecting Rod Assemble (LDC, LDD, LWD, L2I,
L2N)
In case of damage on piston, piston pin or connecting rod, all
components of the piston assembly have to be replaced. The piston
pin can not be removed and reinstalled due to the shrink fit of
connecting rod and piston pin. In case of replacement use a
suitable, customary assemble tool.
1. |
Install the piston rings. Use
piston ring pliers (1). |
|
Note: Mind the TOP
marking on the piston rings.
|
2. |
The piston rings must be
ordered as followed: |
|
• |
Upper compression ring
(1) |
|
• |
Lower compression ring
(2) |
|
• |
Piston oil rings with spacer
(3), (4) |
3. |
The piston ring joints should
be displaced as followed: |
|
• |
Upper compression ring joint
(2) |
|
• |
Lower compression ring joint
(5) |
|
• |
Oil ring joint, upper part
(1) |
|
• |
Oil ring joint, lower part
(4) |
|
• |
Oil ring spacer joint
(3) |
|