Crankshaft and Bearing Installation
Special Tools
EN-45059 Torque Angle Sensor Kit
For equivalent regional tools, refer to
Special Tools
|
Note: Inspect the
installation position.
|
1. |
Install the crankshaft bearing
clips, oil bearing clips. |
2. |
Install the crankshaft.
|
|
Note: Inspect the
installation position.
|
3. |
Install the crankshaft bearing
caps 1-4. |
|
• |
Install the 8 NEW crankshaft
bearing cap bolts. |
|
Note: Inspect the
installation position.
|
4. |
Install the crankshaft bearing
cap. |
|
4.1 |
Apply black adhesive sealing
compound to the grooves of the rear crankshaft bearing cap.
|
|
4.2 |
Install the 2 NEW crankshaft
bearing cap bolts. |
5. |
Tighten the bolts for the
crankshaft bearing caps (1) in 3 passes using the EN-45059
sensor kit: |
|
• |
First pass to 50
N·m (37 lb ft) |
|
Note: Inspect the
installation position.
|
6. |
Install the connecting rod
bearing caps 2 and 3 (1) and oil the bearing clips. |
7. |
Install 4 NEW connecting rod
bearing cap bolts and tighten in 3 passes use the EN-45059
sensor kit: |
|
• |
First pass to 35
N·m (26 lb ft) |
8. |
Turn the crankshaft through
180° . |
|
Note: Inspect the
installation position.
|
9. |
Install the connecting rod
bearing caps 1 and 4 (1) and oil the bearing clips. |
10. |
Install 4 NEW connecting rod
bearing cap bolts and tighten in 3 passes use the EN-45059
sensor kit: |
|
• |
First pass to 35
N·m (26 lb ft) |
|