vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Rear Seat Cushion Replacement > < Driver or Passenger Seat Adjuster Vertical Actuator Handle Replacement

Driver or Passenger Seat Head Restraint Replacement



2019880




Callout


Component Name


1


Driver or Passenger Front Seat Head Restraint Guide Bezel


2


Driver or Passenger Front Seat Head Restraint Adjust Rod Guide


3


Driver or Passenger Seat Head Restraint

Procedure

1. Open the cushion cover at the front seat- rear side.
2. Cut the cable strap from the bowden cable head restraint.
3. Clip out the bowden wire of head restraint- right side.
4. Clip out the bowden wire of head restraint- left side.
5. Release both head restraint guide bezels.
6. Remove both securing's of the head restraint adjust rod guide.
7. Remove the front seat head restraint.
8. Install the new front seat head restraint adjust rod guide.

Tip
Use a commercial screwdriver to remove both of the securing head restraint adjust rod guides.

 

Rear Seat Cushion Replacement > < Driver or Passenger Seat Adjuster Vertical Actuator Handle Replacement