vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Front Caster and Camber Adjustment > < Diesel Engines - Prevention of vacuum pump damage while unloading vehicle from car carrier

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment


           2028016



1. Ensure that the steering wheel is set in a straight ahead position.
2. Loosen the tie rod jam nut (1).
3. Adjust the toe to specification by turning the inner tie rod (2). Refer to Wheel Alignment Specifications .

Caution: Refer to Fastener Caution .

4. Tighten the tie rod jam nut (1) to 60 N·m (44 lb ft) .

Front Caster and Camber Adjustment > < Diesel Engines - Prevention of vacuum pump damage while unloading vehicle from car carrier