Astra J
Input Speed Sensor ReplacementRemoval Procedure
|
1. | Remove the control valve body. Refer to Control Valve Body Replacement . |
2. | Remove the input speed sensor bolt (2) M6 x 23. |
3. | Unlock the 2 retaining tabs inside the transmission housing. |
4. | Remove the input speed sensor (3). |
5. | Remove the 3 input speed sensor seals (1). |
Installation Procedure
1. | Install the 3 input speed sensor seals (1). |
2. | Install the input speed sensor (3). |
3. | Verify that the retaining tabs are locked completely. |
Caution: Refer to Fastener Caution . |
4. | Install the input speed sensor bolt (2) M6 x 23 and tighten to 9 N·m (80 lb in) . |
5. | Install the control valve body. Refer to Control Valve Body Replacement . |
6. | Perform the transmission adaptive values learn procedure. Refer to Transmission Adaptive Values Learn . |