vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Transmission Fluid Cooler Inlet Pipe Replacement - 1.4L LUJ > < Transmission Fluid Cooler Inlet Pipe Replacement - except LUJ, LLU, LNP, LLW

Transmission Fluid Cooler Inlet Pipe Replacement (LLU)



2192419




Callout


Component Name


Preliminary Procedures

1. Remove battery tray. Refer to . Battery Tray Replacement
2. Remove radiator inlet hose. Refer to . Radiator Inlet Hose Replacement
3. Remove charge air cooler outlet air hose. Refer to . Charge Air Cooler Outlet Air Hose Replacement
4. Disconnect the transmission pipe from the radiator and transmission. Refer to . Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection
5. Note the routing of the transmission pipe to ensure proper installation.
6. Remove the transmission pipe from the clips securing the line to the transmission and inlet pipe.


1


Transmission Fluid Cooler Pipe Nut

Caution: Refer to Fastener Caution .

Tighten
22 N·m (16 lb ft)


2


Sealing Washer

Procedure

DISCARD the sealing washer and use NEW only.


3


Transmission Fluid Cooler Inlet Pipe

Procedure

Inspect the transmission fluid level. Refer to Transmission Fluid Drain and Fill .

 

Transmission Fluid Cooler Inlet Pipe Replacement - 1.4L LUJ > < Transmission Fluid Cooler Inlet Pipe Replacement - except LUJ, LLU, LNP, LLW