vauxhall Workshop Repair Guides

Vauxhall Workshop Service and Repair Manuals

Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement > < Transmission Control Lever Knob Replacement

Transmission Front Mount Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Support the front of the transmission using a suitable jack stand.

           2027411



3. Remove the transmission front mount through bolt (1).

           2027412



4. Remove the transmission front mount bolts (1).
5. Remove the transmission front mount (1).

Installation Procedure


           2027412



1. Install the transmission front mount (2).

Caution: Refer to Fastener Caution .

2. Install the transmission front mount bolts (1) and tighten to 62 N·m (46 lb ft) .

           2027411



3. Install the transmission front mount through bolt (1) and tighten to 100 N·m (74 lb ft) .
4. Remove the jack stand.
5. Lower the vehicle.

Manual Shift Detent Lever with Shaft Position Switch Assembly Replacement > < Transmission Control Lever Knob Replacement