Vauxhall Workshop Service and Repair Manuals

Transmission Mount Bracket Replacement - Rear - LNP

Removal Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Using a suitable jack stand, support the rear of the transmission.





3. Remove the rear transmission mount bracket to rear mount through bolt (1).





4. Remove the 3 rear transmission mount bracket to transmission bolts (1).
5. Remove the rear transmission mount bracket (2).

Installation Procedure

1. Install the rear transmission mount bracket (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 3 rear transmission mount bracket to transmission bolts (1) and tighten to  100 N·m (74 lb ft) .





3. Install the rear transmission mount bracket to rear mount through bolt (1) and tighten to  100 N·m (74 lb ft) .
4. Remove the jack stand.
5. Lower the vehicle.